DJI Mavic 2 Pro Overview
Camera in the Sky: Using Drones in Wedding Photography and Videos
This Mavic 2 Pro with Smart Controller & Fly More Kit from B&H includes a DJI Mavic 2 Pro with Smart Controller and the Mavic 2 Fly More Kit. It’s designed to give you an all-in-one solution for aerial filming on location. Right out of the box, you have everything you need to capture amazing footage. The Mavic 2 Pro with its Hasselblad 20MP gimbal camera can capture footage up to UHD 4K 10-bit HDR resolutions. All of it is controlled by the included smart controller, which features a built-in 5.5″ screen for displaying a live stream of what the Mavic 2’s gimbal sees.
The included Fly More accessories pack includes extremely useful accessories to help keep you filming longer. It even has a custom shoulder bag to give you a safe and secure way of transporting your Mavic 2 Pro. You get two additional batteries, four replacement propellers, a car charger, a charging hub, and a handy battery-to-power bank adapter. That adapter is particularly useful out in the wild, letting you recharge a smartphone or other devices with one of the Mavic’s batteries.
DJI Intelligent Flight Battery for Mavic 2 Pro/Zoom
Replace your dead batteries or stock up for long shoots with the Intelligent Flight Battery for Mavic 2 Pro/Zoom from DJI. This battery has a 3850mAh and 59.29Wh capacity that delivers enough power for up to 31 minutes of flight time. Built into the battery is DJI’s Intelligent Battery Management System. This system is designed to monitor battery status and report it in real time.
DJI Car Charger for Mavic 2 Pro/Zoom/Enterprise Batteries
Need to charge up your Mavic 2 battery and you don’t have an outlet? With the Car Charger for Mavic 2 Pro/Zoom/Enterprise Batteries from DJI, you can recharge a Mavic 2 battery pack by using your vehicle’s power port. The charger has a maximum power output of 80W, which can fully recharge your battery in approximately 1.5 hours.
Compatible with Charging Hub
DJI Battery Charging Hub for Mavic 2 Pro/Zoom/Enterprise Batteries
Keep your Mavic 2 powered up with the Battery Charging Hub for Mavic 2 Pro/Zoom/Enterprise Batteries from DJI. It is designed to let you conveniently charge up to four Mavic 2 battery packs at once. First, open each side of the charging hub to expose the four battery connection ports. Next, connect your batteries to the hub, and then to either a DJI Car Charger or Battery Charger (both not included) to deliver power.
The batteries will recharge in sequence based on how much power remains in each one. The battery with the most power remaining will be recharged first, so you can get up and flying as quickly as possible. When finished, fold up the sides and store the compact charging hub into your gadget bag.
DJI Battery to Power Bank Adapter for Mavic 2 Pro/Zoom/Enterprise Batteries
Add more functionality to your spare Mavic 2 batteries with the Battery to Power Bank Adapter for Mavic 2 Pro/Zoom/Enterprise Batteries from DJI. Power banks are a great accessory for mobile devices, providing them with an emergency source of power when needed most. With this accessory, you can convert any of your existing Mavic 2 batteries into one. Simply connect the adapter to your spare Mavic 2 battery to gain two USB Type-A ports. Recharge smartphones, tablets, and other compatible devices with 10W of output power per port.
DJI Low-Noise Propellers for Mavic 2 Pro/Zoom/Enterprise (One Pair)
Nothing will end a day of shooting faster than a busted propeller. Make sure you have enough with these Low-Noise Propellers for Mavic 2 from DJI. This pair of propellers are the same aerodynamic, low-noise designed props that are included with the Mavic 2 Pro, Zoom, and Enterprise drones. They are engineered to deliver a quieter flight with increased efficiency and extended flight times. These propellers also feature a quick release design to help make changes quick and easy.
DJI Shoulder Bag for Mavic 2 Pro/Zoom/Enterprise
The Shoulder Bag for Mavic 2 Pro/Zoom/Enterprise from DJI is designed to make it easy to carry around your Mavic 2 Pro, Zoom, or Enterprise and a host of essential accessories. In fact, it’s capable of storing everything that’s included in the optional Mavic 2 Fly More Kit. The bag can be carried via the removable shoulder strap or with the built-in padded handle.
This bag features a sizable main interior compartment, a zippered front compartment, two side pouches for an umbrella or water bottle, and a zippered section in the flap that can hold smaller accessories, such as memory cards. In total, the bag can hold the following:
- Mavic 2 Pro/Zoom/Enterprise
- Remote controller
- Four Intelligent Flight Batteries
- Extra propellers
- ND filters
- SD cards, and more
PGYTECH Landing Pad for Drones (43.3″)
Treat your beloved drones to a 43.3″ Landing Pad from PGYTECH. Portable and easy to fold, this double-sided pad protects your drone’s gimbal and camera during takeoff and landing. The landing pad comes with three pegs for securing it to the ground so it doesn’t get blown away by the wind while you’re up in the sky. Also included are eight reflective stripes to make landing easier in low-light situations. At the end of the day, just twist-fold the pad, slip it into the included zippered nylon pouch, and you’re good to go.
SanDisk 128GB Extreme UHS-I microSDXC Memory Card with SD Adapter
Designed for microSD devices such as smartphones, interchangeable-lens cameras, drones, or GoPro action cameras that can capture Full HD, 3D, and 4K video, as well as raw and burst photography, the 128GB Extreme UHS-I microSDXC Memory Card from SanDisk has a capacity of 128GB, is compatible with the UHS-I bus, and features a speed class rating of V30, which guarantees minimum write speeds of 30 MB/s. If your device does not support the V30 standard, this card also supports the U3 standard, which also guarantees minimum write speeds of 30 MB/s. Read speeds are supported up to 160 MB/s and write speeds max out at 90 MB/s.
While this card has been designed for cameras that are UHS-I / V30 / U3 compatible, it may be used in devices that do not support UHS-I / V30 / U3. However, bear in mind that this card will then default to your device’s speed class and bus rating, such as UHS-I and U1, which supports minimum write speeds of 10 MB/s, or Class 10, which also supports minimum write speeds of 10 MB/s.
Aside from support for UHS-I, V30, and U3, SanDisk also built this card with support for the Application Performance Class 2 (A2) spec, which includes optimizations to give Android users an improved mobile experience, delivering faster mobile app performance. The A2 spec allows the card to manage random read input-output access per second (IOPS) operations so it can quickly open apps and process accompanying tasks, such as audio, graphics, saved profiles, and in-app permissions.
As with most SanDisk media, this memory card is shockproof, X-ray proof, and waterproof, while also being able to withstand temperatures, allowing you to take this card with you into extreme environments. Should the card’s data become compromised, you also benefit from the option to download RescuePRO Deluxe software, and SanDisk’s Memory Zone app offers users a simple way to organize, browse, and back up files on their Android mobile device. Additionally, included is a microSD to SD adapter with a write protect switch, allowing this card to be used in SD-compatible devices.
Lume Cube STROBE Anti-Collision Light for Drones
Satisfy FAA guidelines by adding anti-collision strobe lighting to your drone so you can fly at night with this STROBE Anti-Collision Light from Lume Cube. Each STROBE light includes a 3M dual-lock mount and a micro-USB charging cable, and it is compatible with any drone.
Each light weighs less than an ounce, so it won’t add much weight to your drone setup. For different patterns, it allows you to configure it to fast strobe, slow strobe, or constant light, and it can be seen 360° from over three miles away. A micro-USB cable is included to charge the built-in battery which takes less than 60 minutes, and it lasts approximately two hours when running on the fast strobe setting. One red and one green cap are included to pop onto the top of the light and change the STROBE color from its default white.
Tiffen 3-Filter Neutral Density/Polarizer Filter Kit for DJI Mavic 2 Pro
This 3-Filter Neutral Density/Polarizer Filter Kit was put together by Tiffen for the DJI Mavic 2 Pro to offer multiple aperture and shutter speed options for Mavic 2 Pro operators. The kit comes with 0.6, 0.9, and 1.2 neutral density/polarizer filters that reduce light from passing through by 2, 3, and 4 stops, respectively, and they help control reflection and reduce glare. Each filter creates a darkening of the entire image, allowing you to photograph with a wider aperture to control depth of field or a slower shutter speed to convey movement more easily.
The filters are made from optical glass with waterproof and scratch-proof multi-coating, which reduces reflection and maintains clarity and color fidelity. The filter rings are made from aluminum, they have a rectangular shape, and the kit includes a metal case to protect and carry them.